Overseemarines Outboard & Marine parts store

Knowlege --Outboard Motor

Mercury Outboard Throttle Control Box - General Information

Mercury Outboard Throttle Control Box - General Information

  • Saturday, 15 August 2020
  • 0
  • 2599
  • 0
mercury outboard throttle control box

Mercury Outboard Throttle Control Box - General Information

The Mercury Outboard Throttle Control Box is a must have for Mercury quicksilver boats. The box will hold the throttle, steering and motor control. It comes with a plastic trim plate, to hold the trim when not in use, which will also protect your steering mechanism. The box has a built in thermostat, with one speed and six forward speeds to help keep your boat at the right temperature. The box also contains the fuel gauges.

The box will be found in many colors; you may choose the one that matches your Mercury vessel. You can also change the trim to match your vessel. The throttle has a removable trim that can be removed and cleaned, while the thermostat is a universal thermostat, you may find the one that fits your vessel the best. You will need to replace the fuel gauges if they are damaged or cracked, the thermostat is a universal one that will fit any vessel and you can easily change it to match your vessel's features.

You should check the box frequently, as the seals are subject to wear and tear and you can find cracks and wear marks in the boxes surface. It is important that the seal has been lubricated properly so that it does not leak.

The outboard throttle control box will also come with a manual. The manual will give you general information about the motor control box and you should read through the manual thoroughly before you start using your new box.

If you have a manual for your motor or engine that is written specifically for the outboard throttle control box, you will find that it will provide much more detail. The manual will describe the operation of the throttle box, the electrical and motor connections, the thermostat, and any maintenance that you would need to carry out.

The mercury outboard throttle control box is designed to hold the throttle, steering and motor all at the same time. You will find that it is easy to operate and will help you sail more effectively.

There are a number of accessories to use with the outboard throttle control box. These include a battery check valve, the throttle cable couplings and some extra mounting hardware for the fan shroud and fuel hose fittings.

If you are installing the box yourself, it is important that you follow the manual very carefully and ensure that all of the screws are tightened properly. If you do not have a detailed manual to follow, you can also ask a mechanic to do this for you.

The most expensive option is to buy the control box ready made from a specialist, but if you are looking to save some money then you could make your own. It will take time and effort, but it can also save you money in the long run.

Tags:boat throttle | boat throttle control | mercury outboard carburetor parts | mercury outboard controls

0users like this.

Leave a Reply