Overseemarines Outboard & Marine parts store

Knowlege --Outboard Motor

Boat Prop Shaft Seal - Proper Care and Maintenance

Boat Prop Shaft Seal - Proper Care and Maintenance

  • Wednesday, 11 November 2020
  • 0
  • 2071
  • 0

Boat Prop Shaft Seal - Proper Care and Maintenance

The reason that boat props sometimes need to be lubricated is because the boat's prop shaft is in a very sensitive area that needs to be lubricated at a regular interval. If you are not able to keep the oil in place, then it will get damaged and cause you to have problems with the prop shafts of your boats.

If you are using oil for lubrication, then it should be changed as soon as you are done with the maintenance, after any wet weather, for instance, when you take the boat out on a boat trip or when you use it in water that has an algae growth. Also, you should lubricate the shaft once you have taken it out for the first time to make sure that it is ready for the trip that you are about to take it on.

When it comes to lubricating the boat, there are a few things that you should remember. First, if you do it properly then you should not have to worry about any damage being caused to the propeller. If you do damage to the propeller though, then you may have to replace it as it may have worn out from some abuse that it has received.

You can either use normal automotive oil as a lubricant, but it is better to just use something like silicone oil. This is easier to obtain and you will find that it is much easier to use. Also, it is less costly than regular oil and also much safer for you to use.

When you start to lubricate your boat, then you should make sure that you first get the oil out of the prop before you can put it back in. You should also be careful not to put it back in unless you first put the oil on it before putting the screws back into place on the prop shafts.

Before you do anything with the oil, you should first check the engine of the boat to see if it needs to be cleaned up before you apply the lubricant. You may find that the engine needs to be cleaned up because it will have dirt and grime inside it that will need to be cleaned up before applying the lubricant to the prop shafts.

After you clean up the engine of the boat, then you can proceed with the boat prop shaft seal. Make sure that you have the oil on the tip of the shaft when you turn the valve and then put it on to make sure that it gets into the proper places on the shaft.

After you have the oil on to it, you should put it on slowly so that the oil will spread out evenly. and you will want to try to let the oil get all the way to the top of the shaft and then let the other end of the shaft oil down first so that you can rub it down with the shaft in hand so that the lubricant will lubricate the shaft and allow it to stay on the shaft and not get washed away by water or mud or algae.

Tags:aluminum prop | boat prop shop | boat propeller

0users like this.

Leave a Reply